/ Max 25 HST randomly blows 10 amp fuse for alternator,glow controller,turn signal etc.
#11
Hi Guys,
I will check the seat even though the schematic shows its controlled by the fuse below the one that blows.
I discovered a few more anomalies this morning while troubleshooting the problem. Again it only blows while operating. Don't know if this means anything but I discovered if I pull the fuse while tractor is running it will keep running. So, I decided to put my ammeter across the fuse block contacts. (I'm not sure why) When I do this the glow plug indicator lights up and the engine slows down. I have no idea if that means anything.
I'm going out now and check the seat switch since it's a known issue regardless of what the schematic shows.
Thanks for all your help. I'll update you a little later.
I will check the seat even though the schematic shows its controlled by the fuse below the one that blows.
I discovered a few more anomalies this morning while troubleshooting the problem. Again it only blows while operating. Don't know if this means anything but I discovered if I pull the fuse while tractor is running it will keep running. So, I decided to put my ammeter across the fuse block contacts. (I'm not sure why) When I do this the glow plug indicator lights up and the engine slows down. I have no idea if that means anything.
I'm going out now and check the seat switch since it's a known issue regardless of what the schematic shows.
Thanks for all your help. I'll update you a little later.
