Max 28 tool box

[Sfrankland]

This is a MAX 25? Where did you get the retractable seat-belt setup? Mine is constantly getting lost under the seat. -J

My Max 28 I had and the 25 I looked at buying originally both had the retractable seat belts.

 

[Tkblacktail]

This is a MAX 25? Where did you get the retractable seat-belt setup? Mine is constantly getting lost under the seat.

-J

Great question do tell; I was wondering that same thing. I added a lanyard to the buckle-end of the seat belt and secured it to the PTO lever; I kept the lanyard long-enough to allow the buckle to fit snugly. I reach for the lanyard at the PTO now. On the other end, I drape the belt over the arm rest or set it in the R/S cup holder.

 

[Shift4200]

Great question do tell; I was wondering that same thing. I added a lanyard to the buckle-end of the seat belt and secured it to the PTO lever; I kept the lanyard long-enough to allow the buckle to fit snugly. I reach for the lanyard at the PTO now. On the other end, I drape the belt over the arm rest or set it in the R/S cup holder.

This is a solid idea as well. No arm rests for me, but the lanyard is a great idea. I'll be honest and say I'd wear my seat belt more often if i didn't have to fumble with finding it.

And TBT... what is the cup holder you speak of? I didn't think Mahindra knew what they were.....

-J

 

[Tkblacktail]

I'm thinking of a 3016; not sure what the differences in the tractors are...no cup holders on the Max 28?

View attachment 350793

I use the "cup-holders" to hold pins, nails, gloves, rags, and other small items.

My armrests are a dream!

$40.00

http://www.tractorbynet.com/forums/mahindra-owning-operating/280606-armrest-3016-seat.html

The lanyard for the seat belt buckle is visible in the one picture.

 

[Shift4200]

I'm thinking of a 3016; not sure what the differences in the tractors are...no cup holders on the Max 28?

View attachment 350793

I use the "cup-holders" to hold pins, nails, gloves, rags, and other small items.

Not sure about the 28, but the only cup holder on my 25 is between my legs.

-J

 

[Tkblacktail]

Not sure about the 28, but the only cup holder on my 25 is between my legs.

-J

A couple white pine 1X4s (on end & side by side) easily slides under the seat (with minor milling) and stays-put, to form a rectangle protrusion which can be shaped into a cup-holder or small center console using 90 degree 1X4s and screws.

A 13" L assembly should protrude forward and out 4" while not interfering with operator functions.

When/if I get my tractor back, I will take and post the pics; and spend less time on the internet.....

 

[Shift4200]

A couple white pine 1X4s (on end & side by side) easily slides under the seat (with minor milling) and stays-put, to form a rectangle protrusion which can be shaped into a cup-holder or small center console using 90 degree 1X4s and screws.

A 13" L assembly should protrude forward and out 4" while not interfering with operator functions.

When/if I get my tractor back, I will take and post the pics; and spend less time on the internet.....

I'd be interested in seeing what you cooked up. I've been looking at different clamp on style options for a while now. Best I've found so far is at Duluth Trading Co. They call it the robocup. Looks pretty sweet.... Link below.

Cupholders - Robocup - Duluth Trading

-J

 

[robbieo11]

This is a MAX 25? Where did you get the retractable seat-belt setup? Mine is constantly getting lost under the seat.

-J

It is standard i beleive because on the turning seat for backhoe i got with it

 

[Shift4200]

It is standard i beleive because on the turning seat for backhoe i got with it

Thanks!

 

[jimpen]

Not sure about the 28, but the only cup holder on my 25 is between my legs.

-J

Well this is what I came up with to do the cup/beer holder for my Max 25.