massey135ferguson
New member
- Joined
- Sep 18, 2019
- Messages
- 1
- Tractor
- massey ferguson 135
good day, I am currently working on my MF 135 steering box and power steering cylinder. I am hoping that someone might be able to help me with an issue i am having.
I have a steering box with a power steering cylinder attached to the steering box. Long story short broke the steering rack attached to the PS cylinder, i have sourced out a new rack, o-rings, and seals.
However the service manual i have does not cover the re-assembly procedure of this box and cylinder combination. It only covers the power steering at the wheel. i have re-assembled the steering box and cylinder but don't have the full turning radius. I was hoping that someone out there might have some insight on how to align the gears and rack properly to get full turning radius.
thanks for any help. jeffrey
I have a steering box with a power steering cylinder attached to the steering box. Long story short broke the steering rack attached to the PS cylinder, i have sourced out a new rack, o-rings, and seals.
However the service manual i have does not cover the re-assembly procedure of this box and cylinder combination. It only covers the power steering at the wheel. i have re-assembled the steering box and cylinder but don't have the full turning radius. I was hoping that someone out there might have some insight on how to align the gears and rack properly to get full turning radius.
thanks for any help. jeffrey