I was shredding and it acted like it ran out of fuel, died. Fyel in the tank, I changed fuel filter, tried priming with lift pump, could not get it to prime. Pulled tank, checked inside and clean. Pulled fitting on bottom of tank, it’s clean and I can blow through it, no obstruction. Checked line from tank to filter, no obstruction. Put back together and appears to be leaking at lift pump. I got a edelbrock electric diesel pump5-9psi. Put it inline coming from tank to filter housing, ( bypass manual lift pump) still no fire. Soak rag in gas, hold over air filter housing and it will run off vapors. Cracked the front 2 injector lines, got fuel coming out of cracked open fittings while it’s running with gas rag. Tighten lines up, will not fire off.
Only way I can get it to run is with gas rag over air filter housing.
What am I missing?
Only way I can get it to run is with gas rag over air filter housing.
What am I missing?