MF135 draft control rod help

[rosie48188]

Hello, I have MF135 and the lift stopped working. I took draft lever cover off and saw the hydraulic valve lever pivot mounting screw missing and lever no longer activating pump. Then I remove lift cover and see draft control rod round part broke off. I have new draft control rod, but cannot see how to get the old one off the shaft it pivots on--- is that shaft pressed into another part, or how do I get to it? Maybe I need to keep taking apart more of that linkage from the cover? any guidance appreciated-- thanks

 

[rosie48188]

I am looking at the manual, but this part of the assembly is not so clear to me

 

[rosie48188]

I figured it out--- a retaining ring that would have been a lot easier if was traditional snap ring to use pliers on. Anyway, all back together, and working fine