Milwaukee hedge trimmer

[Dwellonroof]

Anyone have one?
I'm thinking about purchasing one since I have quite a few 18 volt Milwaukee tools.

 

[plastikosmd]

No experience but I have a friend with the mower weedwacker and loves

 

[jyoutz]

Never had a problem with Milwaukee tools

 

[Lineman North Florida]

I have one and it's like the rest of the stuff they make, a workhorse, mine is the one on the stick for taller hedges, a little heavy but has been flawless, the handheld would probably be a little lighter.

 

[seville009]

I have a DeWalt brand one - pretty much all the same, I assume. Works great.

 

[jyoutz]

I have a DeWalt brand one - pretty much all the same, I assume. Works great.

They really are pretty much going he same. It seems like the brand choices are pretty much made by the other tools and batteries you already have. Batteries and chargers are a significant cost, so staying the same is a big savings. I’m pretty much locked in to Dewalt 20v and Meketa 18v tools now.

 

[Williy]

Since black & decker took over
* DeWalt
* Porter-Cable
* Delta Machinery
* DeVilbiss Air Power
* Kwikset
* Baldwin
* Weiser Lock
* Price Pfister
* Emhart Teknologies
* Oldham Blades
* Black and Decker Firestorm
* Vector
.I don't purchase from any of these companies
purchased a black & decker drill drilling a small hole in
a 2x4 and the drill stopped took it apart and the gears
were broke, you could push the gears over with your
thumb. Purchased a black & decker skill saw clamped a 2x4 on a sheet of 3/4x4x8 plywood and holding saw
against the 2x4 blade started binding let go of the trigger lifted the saw and I had a curve cut not straight
took the saw back to walmart blade had a 1/2 inch play
in it.

willy

 

[jyoutz]

Since black & decker took over
* DeWalt
* Porter-Cable
* Delta Machinery
* DeVilbiss Air Power
* Kwikset
* Baldwin
* Weiser Lock
* Price Pfister
* Emhart Teknologies
* Oldham Blades
* Black and Decker Firestorm
* Vector
.I don't purchase from any of these companies
purchased a black & decker drill drilling a small hole in
a 2x4 and the drill stopped took it apart and the gears
were broke, you could push the gears over with your
thumb. Purchased a black & decker skill saw clamped a 2x4 on a sheet of 3/4x4x8 plywood and holding saw
against the 2x4 blade started binding let go of the trigger lifted the saw and I had a curve cut not straight
took the saw back to walmart blade had a 1/2 inch play
in it.

willy

I have likewise had repeated problems with black and decker drills, but never a problem with Dewalt tools. They are not the same even if owned by the same company.