20 20
Elite Member
thought this was interesting
Off Road Jeep You Build Yourself! From our Struck-Kit Plans - YouTube
Off Road Jeep You Build Yourself! From our Struck-Kit Plans - YouTube
mini beep
- Thread starter 20 20
- Start date
- Views: 25621
Verticaltrx
Veteran Member
- Joined
- Dec 30, 2009
- Messages
- 1,908
- Location
- VA
- Tractor
- Kubota B3200/L2501/SVL65-2/U35-4, IH 454/656, Ford NAA, Case 1845C/480E/450C LGP
Yup, I got a flyer in the mail about them. Not something I would want but might be fun to build. Something I do want to build someday (like I have time) is the Struck Magnatrac MT1800 (first crawler they made that actually looks like a dozer.) I got a set of plans for it years ago and looks like a fun little crawler. Not sure how much work it could do, but more than my garden tractor I'm sure. Mostly just something to play with.
Mace Canute
Elite Member
handirifle
Veteran Member
That thing is exactly what I was thinking of doing with my 20hp lawnmower that just died. The engine is dead but the rest of the drive train is excellent. Including a manual tranny with 5 spd.
I might have to pull it apart and start working on a body to put it all in.
I might have to pull it apart and start working on a body to put it all in.
mjncad
Super Member
Interesting; but I don't think I want to use plywood for a body that's going to be in the water as shown in the video.
I could see this being a good father-son type of project.
I could see this being a good father-son type of project.
Interesting; but I don't think I want to use plywood for a body that's going to be in the water as shown in the video.
I thought the same thing and figured if they used marine grade wood and sealed it, it'd probably be pretty tough.
Verticaltrx; I have the nortrac dozer weighs in around 7000lbs, I have been very pleased with the amount of work I have done with it. It's handy in the woods because it isn't so big that it destroys everything. I have pushed 100's of tons of dirt rock etc... and it has not let me down. A lot of folks say a small dozer is worthless, I have to disagree completely.
Handirifle: when you start that project show some pictures
I thought the same thing and figured if they used marine grade wood and sealed it, it'd probably be pretty tough.
Verticaltrx; I have the nortrac dozer weighs in around 7000lbs, I have been very pleased with the amount of work I have done with it. It's handy in the woods because it isn't so big that it destroys everything. I have pushed 100's of tons of dirt rock etc... and it has not let me down. A lot of folks say a small dozer is worthless, I have to disagree completely.
Handirifle: when you start that project show some pictures
Thomas
Epic Contributor
- Joined
- Apr 6, 2000
- Messages
- 31,763
- Location
- Lebanon,NH.
- Tractor
- Kubota B2650HSD w/Frontloader & CC LTX1046 & Craftman T2200 lawn mower.
Interesting..I'd feel safe w/heavy duty fiber glass body before going fishing.
mitchash
Gold Member
I have seen the plans. It is a pretty cool machine. The plans use marine grade plywood and seal it.
davedj1
Veteran Member
I want to build one of these for my grandson. What would you use for rear drive axle? It must have a variable belt drive as they mention "transmission" in the video.
mitchash
Gold Member
Struck Corp has the plans and kits to build them.
