Mini-Loader Bucket / Attachment Compatibility

   / Mini-Loader Bucket / Attachment Compatibility #1  

keeney

Veteran Member
Joined
Dec 2, 2001
Messages
1,060
Location
Minnesota
Tractor
JD 4100 HST
Are the bucket attachment plates from any of these mini-loaders compatible?

I am thinking of building an adapter to allow mini-loader attachments to be mounted on my loader arms because the mini-loader attachments are more readily available at rental centers.

I think most of these use a very similar Bobcat-like mounting system, but its not clear to me if they are compatible or not.

Anybody know of the compatibility of the mounting systems between any of the following:

Bobcat MT50
Bobcat 463
Bobcat Toolcat
Toro Dingo
Ramrod
DitchWitch SK500
Kanga
Gehl
Others?

I am not as concerned about hydraulic coupling compatibility. but if that is known, it would be useful as well.

- Rick
 
   / Mini-Loader Bucket / Attachment Compatibility #2  
Kubota sells a loader for their compacts that uses a skid steer quick disconnect bucket for that very reason.
 
   / Mini-Loader Bucket / Attachment Compatibility #3  
Rick when I purchased my New Holland I ordered the quick attach feature on my FEL, bucket, and pallet forks. I was told at the time that it was compatible with any Bobcat implement. I haven't rented any yet to verify that but they do look the same physically.
 
   / Mini-Loader Bucket / Attachment Compatibility
  • Thread Starter
#4  
in regards to PineRidge: "... it was compatible with any Bobcat implement."

I am talking about attachments for mini-loaders. My tiny little JD 4100 doesn't have the weight or HP to handle attachments sized for a full-sized skid-loader. 2500lbs x 18hp for the 4100 vs 10,000 lbs x 80hp for your typical skid-loader.

I have some of the parts from the machine-side of a Dingo quick-mount as a good starting point, so I am certian that the Toro Dingo plate is a smaller version of a standard skid-loader plate.

From photos on the web, it looks like most other mini-loaders also have a mini version of the quick-attach plate, but I am not sure if they are the same as the Toro or different in some subtle way. Maybe if the difference is slight enough, I can modify or design something that can take more than one brand.

- Rick
 

Tractor & Equipment Auctions

Road Master Bike w/Engine (A50860)
Road Master Bike...
Vacuworx Vacuum Lifter Pad (A50860)
Vacuworx Vacuum...
2006 Ford Crown Victoria Sedan (A50324)
2006 Ford Crown...
2007 MACK GRANITE ROLL OFF TRUCK (A51222)
2007 MACK GRANITE...
2015 Ford F-550 4x4 Knapheide Service Truck (A48081)
2015 Ford F-550...
2008 International 4400 Terex Hi-Ranger HRX-55 55ft Material Handling Insulated Forestry Bucket (A48081)
2008 International...
 
Top