Mini skid loader... check it out!
- Thread starter cstocks
- Start date
- Views: 1405
GaryM
Veteran Member
Looks a little smaller than the Toro Dingo. Nice unit though. Where can I rent one?
Taylortractornut
Elite Member
- Joined
- Mar 27, 2002
- Messages
- 2,770
- Location
- Iuka Mississippi USA
- Tractor
- 3550 Fard Backhoe and a 1948 Farmall Cub,
Thats a Ramrod brand Te list for minis loaders include Kanga,Toro,Ramrod,Gravely,Skidster,Finn,Avance,Bobcat,and Cheetah and a few others icant recall. The Puma hase a hoe on the rear and its a sit on as well as the skid steer of Avance which is sold bt Gehl but made by another company. The Cheetah is sold by a Roffing company mostly for roof gravel and removal i believe. i d like one to have on some of my smaller jobs. Kanga also make a smaller sized machine in addition to the larger stand on machine.
MDNick
Gold Member
Cstocks,
Saw a guy using a small (different make than this) skid loader for digging out a basement under an existing house. Was something like a snowmobile, with 2 tracks and a FEL. Looked purpose built for the application. I just saw it as I drove by, no idea what it was. But couldn't think of a better weapon for the problem.
This looks like a neat little machine. I'd get tired of standing up, though.
Nick
Saw a guy using a small (different make than this) skid loader for digging out a basement under an existing house. Was something like a snowmobile, with 2 tracks and a FEL. Looked purpose built for the application. I just saw it as I drove by, no idea what it was. But couldn't think of a better weapon for the problem.
This looks like a neat little machine. I'd get tired of standing up, though.
Nick
livincountry
Silver Member
I rented the Kanga model with a FEL. It was the larger of the two models available at the rental place I use. Machine worked great for digging out an area for our deck (it was a low deck and I wanted some ground clearance for air circulation). Made quick work of the digging and was less damaging on the wet yard than a full size bobcat. My only concern was that the hydrostatis controls on the handle bars were touchy. DO NOT STOP WHEN THE BUCKET IS LOADED AND UP ABOVE THE CG OF THE MACHINE. I was almost catapulted over the whole machine. Once this was understood I was OK.
thcri
Elite Member
Must be all mulch in that bucket. I would think if it was dirt it would have tipped right over. There is a guy in town that has one pretty close to that. He has a landscaping business and uses it a lot. To me, just buy a tractor or real skid loader. It is only good when you have small areas to get into.
murph
murph
JDGREEN4ME
Veteran Member
- Joined
- Sep 27, 2002
- Messages
- 2,162
- Location
- Southeast PA
- Tractor
- John Deere 2520, John Deere X534, GT 225, GT 275
Didn't we send one of those to Mars? /forums/images/graemlins/grin.gif /forums/images/graemlins/grin.gif /forums/images/graemlins/grin.gif
MossRoad
Super Moderator
- Joined
- Aug 31, 2001
- Messages
- 57,924
- Location
- South Bend, Indiana (near)
- Tractor
- Power Trac PT425 2001 Model Year
<font color="blue"> I would think if it was dirt it would have tipped right over. </font>
I don't know about that... their model numbers appear to correspond to the lift capacity. The model 800 lifts 800 pounds to full height. Model 1150 lifts 1150 pounds, etc...
Plus they have a carrying capacity that exceeds their maximum lift capacity by quite a bit. Go check out their web site for the listed specs. Pretty impressive machines.
I don't know about that... their model numbers appear to correspond to the lift capacity. The model 800 lifts 800 pounds to full height. Model 1150 lifts 1150 pounds, etc...
Plus they have a carrying capacity that exceeds their maximum lift capacity by quite a bit. Go check out their web site for the listed specs. Pretty impressive machines.