Mini track loaders

[qwerty15]

Does anyone make a mini track loader or a mini dozer?

 

[Tags]

Yup,Tackehuchi(not sure thats spelled right) and ASV both make a couple of cool models.Tackehuchi makes 2 models a 130 and a 150,I have run the 150,it has a 110hp Yanmar engine,rubber tracks,1yd bucket,skid steer coupler,and has a hydrostatic tranny.The drive is done w/a servo controlled joystick as is the bucket controll,the machine has tons of power and good operating capacity(I think the capacity is about 5000lbs)The one I ran had a tooth bucket and a six way blade attachment which worked well.The ASV is very similar but "looks"more like a track loader than a skid steer.The only problem I had w/these machines was the pricing....right around 50k,plus the added cost of any attachments....hope this helps!

 

[ljh2]

yup!

The ASV has really caught my eye lately. They recently
introduced the new R50/RC50 models which filled a big
gap in their product line.

You can check them out at:
<A target="_blank" HREF=http://asvi.com>http://asvi.com</A>

Larry

 

[gatractorman]

Hey Gwerty, Bobcat also has tracked skid-steer loaders, as of now they have a small walk behind model MT 50, as well as 2 sizes of tracked Bobcats T190 56 h.p. turbo Kubota 1900 lb. ROC (rated operating capacity is half of actual tipping load) and a T200 73 h.p. turbo Deutz 2000 lb. ROC, have heard rumors about a bigger machine built along the size of a 963 skid-steer. You can purchase a 6-way dozer blade attachment for the Bobcats and on the tracked machines there just like an actual dozer they will really do the job.