I heard he signed a contract to move some dirt after telling someone he had a loader, when he got to the job it entailed modifying a previous strip mine. He's got the 8 inch diameter cylinders on his 4310 working and almost has the modifications to his 4-1 bucket done, i.e. widening it to 16 feet. He did mention he's running out of rocks and engine blocks to hang off the back to keep the tractor level. The Michelin tires are holding up well, but he has to run them at 200psi. Seems to work OK but he can hear the air leaking THROUGH the rubber so he has an air compressor running off the 3pt to keep them up.
del
MARK, if you don't get done soon let me know, I'll get the BX up there workin'!