Mitsubishi MT372

   / Mitsubishi MT372 #1  

D40

Member
Joined
Sep 24, 2002
Messages
33
Is there anyone who can tell me how the hydralics on the MY372 works? The lift quits after the tractor has been running awhile. Maybe it is low on hydralic oil. How do you check the hydralic fluid level and where is the fill hole?
Thanks, David40
 
   / Mitsubishi MT372 #2  
The fill plug is on top of the transmission to the right and behind the shifter . It is a rubber plug that simply pulls out .
As far as the full line /level mark , there is a plug on the side of the transmission near the foot pedal area,just fill with universal hydraulic/transmission oil til it runs out . There is a screen/filter that should be cleaned once in a while also .If transission oil is very low, now would be a good time to clean it because you need to drain the transmission before removing it.
 
   / Mitsubishi MT372 #3  
I sell manuals that would help you when servicing your tractor. We have Owners, Service and Parts manuals available. I can also email pictures of specific things such as where the filter is located, etc.and answer telephone (or email) inquirys regarding service questions. Call Bill at 540-345-9650(Va) or email vppinc@rev.net.
 

Tractor & Equipment Auctions

LOT: (2) Kimball Midwest 40-Hole Hardware Cabinets w/Contents (A59076)
LOT: (2) Kimball...
WHISPERWATT 220 DIESEL POWERED GENERATOR (A55745)
WHISPERWATT 220...
2019 Freightliner M2 106 AWD Altec AA55 56ft. Insulated Material Handling Bucket Truck (A55973)
2019 Freightliner...
Great Dane Van Trailer 1989 (A56435)
Great Dane Van...
2014 JOHN DEERE  544K WHEEL LOADER (A58214)
2014 JOHN DEERE...
2011 Komatsu GD655-5 Motor Grader, S/N 55088 C014007, PIN# KMTGD026P01055088, Turbo Diesel Engine, (A59076)
2011 Komatsu...
 
Top