MMM Cleaning

   / MMM Cleaning #1  

gusg

Silver Member
Joined
Jun 18, 2002
Messages
192
Location
Vail, AZ
Tractor
B7510 with R4s
I cleaned my MMM yesterday and had a problem getting some of the black residue off. I used a metal putty knife followed by a plastic putty knife and a stiff brush so I wouldn't take off the paint. It was mostly in a circular area around each of the blades. It is a very light amount. I don't have a pressure washer so I guess I will have to invest in one. Is this possibly mold and it will die after it is exposed to air? I did spray some WD40 on the underside of the deck and put it up for the winter. I will lube it and release the tension on the belt today.
 
   / MMM Cleaning #2  
I am appearently the laziest person in the world. Does it harm the deck to leave the grass gunk on it? I figure I'll scratch the paint cleaning it off, and it will rust quicker than if I would have just let well enough alone.
But since you're cleaning it, try some alcohol to see if it kills the black stuff.
Good luck.
 

Tractor & Equipment Auctions

2013 KENWORTH T8 SERIES (A50854)
2013 KENWORTH T8...
Toro Zero Turn Mower (A50322)
Toro Zero Turn...
2022 Third Coast Reversible Plate Compactor (A51573)
2022 Third Coast...
UNUSED CFG Industrial H15R Mini Excavator (A47384)
UNUSED CFG...
2 Vintage Metal Signs (A48081)
2 Vintage Metal...
Portable Cattle Loading Shute (A50515)
Portable Cattle...
 
Top