Moldboard plow

[Adam2012]

I have a moldboard plow that my buddy let me have I cant figure out what brand it is. There is a tag on it and the only thing you can make out on the tag is Ohio in big letters. Does any one know what brand this might be? I have tried to look it up but with no success, it is a shear pin type. Thanks

 

[bullbreaker]

Try to post a pic !
Sounds like its a World Agritech Corp / International(not I-H) / Worksaver plow.

Boone

 

[Adam2012]

Thank you Boone you are right, that is the plow that I have. I appreciate that you took the time to post the pics. The plow is in rough shape I have to do some work on it the pics will be really helpful.

Thanks Adam

 

[bullbreaker]

Thank you Boone you are right, that is the plow that I have. I appreciate that you took the time to post the pics. The plow is in rough shape I have to do some work on it the pics will be really helpful.
Thanks Adam

Adam if you notice one has a protruding beam out in front of it.That is to put(mount) a coulter wheel on it.
The other design with no beam on front is for a compact tractor.I own the one with beam with a coulter wheel.New complete it cost me $530.

Boone

You can just see part of it under other stuff in shop !

 

[Adam2012]

Boone my plow had the beam at one time, someone has cut it off. It is a older plow I will send a pic when I get it in working order.
Thanks again
Adam

 

[Adam2012]

I wish I would have got some pics before I worked on it. It's not perfect but alot better then it was.

 

[Adam2012]

Later on this spring I want to paint it and put a coulter back on.

 

[bullbreaker]

Later on this spring I want to paint it and put a coulter back on.

Heres my coulter assembly of course it goes on front protruding beam.
I put tag next to it to give you an idea of size.

Boone

 

[Adam2012]

Thanks Boone that will help. I am anxious for the ground to dry up so I can try it out, and see if I need to modify anything else on it.

Thanks Adam

 

[gregsons]

I just bought a used 3 Point 6 foot disc built but them. never heard of them before. its in real good shape need nothing now. How was there stuff built, good quaility? also where can i buy parts when that time comes?

 

[bullbreaker]

I just bought a used 3 Point 6 foot disc built but them. never heard of them before. its in real good shape need nothing now. How was there stuff built, good quaility? also where can i buy parts when that time comes?

Can you please post some pics when you can ?

Boone

 

[blueriver]

Try to post a pic !
Sounds like its a World Agritech Corp / International(not I-H) / Worksaver plow.

Boone

Very Good ... ID'd with out a picture. Now tell me where I can find plow shares and moldboard parts for a 1 bottom Moline.

 

[bullbreaker]

Very Good ... ID'd with out a picture. Now tell me where I can find plow shares and moldboard parts for a 1 bottom Moline.

Call ChatsTractor Inc 309-465-3364(Dick) or 309-833-5697 (Bob)


If not try :
http://www.norwest-mfg.com/catalog/TIL400.pdf

When the ranch-hand rears/bucks hang on tight on-em reins ! and lean forward . :thumbsup:

Boone

 

[blueriver]

Call ChatsTractor Inc 309-465-3364(Dick) or 309-833-5697 (Bob)


If not try :
http://www.norwest-mfg.com/catalog/TIL400.pdf

When the ranch-hand rears/bucks hang on tight on-em reins ! and lean forward . :thumbsup:

Boone

Boone ... thanks I will call them. Reminds me when the hotel clerk asked the honeymoon couple if they would like the "bridal" suite ... the old boys says.. "Naw I just hold onto her ears till she gets used to it" !!!!!!!!!!!!

 

[bullbreaker]

Boone ... thanks I will call them. Reminds me when the hotel clerk asked the honeymoon couple if they would like the "bridal" suite ... the old boys says.. "Naw I just hold onto her ears till she gets used to it" !!!!!!!!!!!!

:laughing: :laughing: :laughing:

Boone

 

[sweettractors]

I just bought a used 3 Point 6 foot disc built but them. never heard of them before. its in real good shape need nothing now. How was there stuff built, good quaility? also where can i buy parts when that time comes?

We have parts for most all The WAC and IMC tools that were sold in Bethel Ohio. Ken Sweet

 

[bullbreaker]

Very Good ... ID'd with out a picture. Now tell me where I can find plow shares and moldboard parts for a 1 bottom Moline.

Find anything out yet ? Let us know will keep hunting !

Boone

 

[blueriver]

Find anything out yet ? Let us know will keep hunting !

Boone

Nope ... been playing with my subsoiler !!!

 

[bullbreaker]

Nope ... been playing with my subsoiler !!!

Blue here's more :
Wasco Hardfacing Company, Inc., Tillage tool Distributors, Cultivating equipment distributors, Manufacturers

Balster's Implement & Parts: Plow Shares

The Minneapolis-Moline Tractor Web Site, Minneapolis-Moline, Twin City, Moline Plow Co., Minneapolis Threshing Machine Co.

Boone

 

[blueriver]

Blue here's more :
Wasco Hardfacing Company, Inc., Tillage tool Distributors, Cultivating equipment distributors, Manufacturers

Balster's Implement & Parts: Plow Shares

The Minneapolis-Moline Tractor Web Site, Minneapolis-Moline, Twin City, Moline Plow Co., Minneapolis Threshing Machine Co.

Boone

Thanks Boone ... got an email into Wasco, Balsters sold out at auction in Sept. The MM site I joined the forum and have been checking in ocassionally.

I bought that plow at one of my auctions about ??? well a few years ago. I have literally wore the moldboard and shares down to nothing ... if I can find parts I'm thinking about making it a ???? Any ideas?