More on board sizes

   / More on board sizes #1  

Tdog

Platinum Member
Joined
Apr 30, 2001
Messages
936
Location
SE Louisiana
Tractor
BX22
I’ve enjoyed following Cliff Johns’ story of turning big boards to small, dovetailed ones. I began to dabble with woodworking since I retired. [Did someone mention this is an expensive pastime?] The first thing I wanted to tackle was kitchen drawers - - it seems the more I approach geezerdom, the harder it is to stand on your head to see what’s in the back of a cabinet. Sliding drawers seemed like the solution. I started this project early in 2005 but took a year break after Katrina. I’ve recently started again, taking on one cabinet at a time.

I’m lucky to have a neighbor who has a planer/joiner & thickness planer and has invited me to use them when needed. I bought a Rockler dovetail jig & a Porter Cable router. I got started once I had the wood milled to thickness at my neighbor’s. I’m making the drawers out of African mahogany, but I practiced plenty with pine.

The job hasn’t been mistake free, but for the most part I’ve been able to hide them. So far I’m on my 5th, cabinet, a total of 12 drawers. I’ll probably stop after one more 4-drawer cabinet.

Anyway, here are a couple of shots that I took after I made my first drawers.
 

Attachments

  • P8040006 (2).JPG
    P8040006 (2).JPG
    31.8 KB · Views: 169
  • P1240003.JPG
    P1240003.JPG
    19.1 KB · Views: 153
   / More on board sizes #2  
If the spouse sees this my project list and priorities is gonna undergo significant changes.
 
   / More on board sizes #3  
Nice job on the drawers. All those little thjings add up. Dovetail Jigs, Routers etc. It sure is **** nice though when you're finished and everyone says who made that!! It takes patience and detail to make cxabinets and furniture. Nothing like rough framing......Good job.
 
   / More on board sizes #4  
Be careful there, friend. You may end up with a new career. Great looking drawers!
 
   / More on board sizes #5  
Nice, neat tails and some fine looking wood. Drawers under the kitchen cabinets are much better than shelves, no doubt about it.

Cliff
 

Tractor & Equipment Auctions

RHINO FR180 FLEX-WING ROTARY MOWER (A50459)
RHINO FR180...
40' CONTAINER (A50459)
40' CONTAINER (A50459)
UNUSED LANDHONOR 9200# RATCHET & G70 CHAINS (A50460)
UNUSED LANDHONOR...
Hay Spear Attachment (A48837)
Hay Spear...
2025 Swict 72in Bucket Skid Steer Attachment (A49346)
2025 Swict 72in...
Buffalo Turbine BT-CYC8KK Cyclone 8000 Towable Debris Blower (A49346)
Buffalo Turbine...
 
Top