I can't either but, I think there are plenty of people who do not know there are different kinds!
Mounting Lights...Have Questions
- Thread starter jgbanshee
- Start date
- Views: 3249
I can't either but, I think there are plenty of people who do not know there are different kinds!
Soundguy
Old Timer
- Joined
- Mar 11, 2002
- Messages
- 52,424
- Location
- Central florida
- Tractor
- RK 55HC,ym1700, NH7610S, Ford 8N, 2N, NAA, 660, 850 x2, 541, 950, 941D, 951, 2000, 3000, 4000, 4600, 5000, 740, IH 'C' 'H', CUB, John Deere 'B', allis 'G', case VAC
there's a reaso why the small hand-squeeze tube costs about 2x as much as the long gun-type tube. 
soundguy
soundguy
bucmeister
Silver Member
I've had good luck with the liquid tape stuff. Just solder up the joint then paint on the liquid tape which I let dry a while and paint on another coat.
chipsndust
Platinum Member
Just finished mounting a rear work light on my JD 2305. I soldered the connections and put heat shrink over them.
I re-installed the light because I just had a cab put on my tractor. The work lights were on for three years, installed the same way with no problems.
I re-installed the light because I just had a cab put on my tractor. The work lights were on for three years, installed the same way with no problems.
