MT240E F02 637 error code solid red alert tractor in limp mode

   / MT240E F02 637 error code solid red alert tractor in limp mode #1  

gatlvi

New member
Joined
Sep 15, 2013
Messages
2
Location
north charleston, SC
Tractor
67 ford 3000
MT240E F02 637 error code solid red alert tractor in limp mode .
drained fuel filter recovered some moisture cleaned air filters
advice ?
 
   / MT240E F02 637 error code solid red alert tractor in limp mode #3  
s637 F02 (P0341) - Cam signal drift fault
s637 F10 (P0340) - Cam signal learn fault

Context:
The Engine Control Unit (ECU) A-009 monitors the camshaft position sensor B-006. The ECU A-009 uses this data
to adjust fuel injection control to maintain proper power levels. If the camshaft position sensor B-006 circuit becomes
open or shorted, this fault will occur. Because of this fault, the Diesel Particulate Filter (DPF) regeneration control will
stop, an increase in engine speed and a reduction in engine torque may occur.
Cause:
The camshaft position sensor B-006 signal is out of range.
Possible failure modes:
1. Faulty camshaft position sensor B-006, internal failure.
2. Faulty camshaft position sensor B-006 circuit wiring, open or shorted.
3. Faulty ECU A-009, software or hardware
 
   / MT240E F02 637 error code solid red alert tractor in limp mode
  • Thread Starter
#4  
Thank you . Very helpful
 

Tractor & Equipment Auctions

UNUSED LANDHONOR LARGE 36" ROUND FIRE PIT RING (A50459)
UNUSED LANDHONOR...
HOWSE ES24 DIRT SCOOP (A50459)
HOWSE ES24 DIRT...
Spring Tooth Plow (A48837)
Spring Tooth Plow...
2020 Crane Carrier Co Side Loader Garbage Truck (A48081)
2020 Crane Carrier...
New Holland LX665 Skid Steer (A50490)
New Holland LX665...
2004 Ford F-750 Crew Cab Wrecker Tow Truck (A48081)
2004 Ford F-750...
 
Top