Robbie0125
New member
I知 having a problem with a MTD 522 log splitter. Motor binds and stalls when under a load. I changed the coupling and spider gear. I haven稚 run any pressure test. It will start splitting, then bind and stall the motor.
MTD log splitter bogs down and stalls
- Thread starter Robbie0125
- Start date
- Views: 5721
yomax4
Elite Member
- Joined
- Mar 11, 2007
- Messages
- 2,847
- Location
- Midwest
- Tractor
- ISEKI TA 247. Stihl Saws Gravely Zt's Polaris ATV's State Of The Art Welding Equipment
Could be the Governor. Google engine governor. I had the same issue with a tiller. Governor linkage had come loose and it would run perfect until the tines touched the soil then it would bog and die.
bigdeano
Platinum Member
Is the carb mixture adjustable? Sometimes the jets get partially blocked with gum from the gas and it will have no power. Maybe you could open the jet a little or clean the carb. I don't know if that's the problem, just a suggestion.
John_Mc
Elite Member
- Joined
- Aug 11, 2001
- Messages
- 4,625
- Location
- Monkton, Vermont
- Tractor
- NH TC33D Modified with belly pan, limb risers & FOPS. Honda Pioneer 520 & antique Coot UTV
Is this definitely a motor issue, and not a matter of the ram on your splitter binding under load?
oldnslo
Super Member
If this is a Hi-lo log splitter pump is it possible the sequence valve for shifting from hi to low is stuck or malfunctioning. Like John states, you need to determine if this is an engine problem or a hydraulic problem.
