My 2016 M6060

[MrFoPow]

Love it.

 

[PSDStu]

Nice looking setup!

You may want to consider getting the front Rubber or Chains for your rotary cutter. The rubber or chains will keep alot of the trash from being thrown back up at the rear of the tractor.

Never understood why LP doesn't just at least install the rubber on the front as standard equipment.

 

[No Chrome]

LP sent the wrong chains.
the correct ones just arrived at my office:thumbsup:

 

[No Chrome]

ya done good, can't go wrong with that set up. is that a 6' hog on back?

yes it is.
i know the 6060 can run a much larger mower but we have a pine tree farm so there is a lot of trees to dodge.
i like my cutter tracking behind me and not sticking out on both sides.
i use my smaller massey 1440 for running inside the trees.

 

[No Chrome]

i do 90% mowing and 10% tree trimming,grapple and bucket work
so heres what i got...
M6060 HDC
8+8
1 rear remote
LP RCF2072 mower with front chains
LA1154 loader with 72" bucket
3rd function valve
Air Ride Seat
Pioneer 200 watt stereo with bluetooth and remote control
heat and A/C
R4 tires
delivered for $41,500.00 out the door.

how did i do?

 

[TripleR]

i do 90% mowing and 10% grapple and bucket work
so heres what i got...
M6060 HDC
8+8
1 rear remote
LP RCF2072 mower with front chains
LA1154 loader with 72" bucket
3rd function valve
Air Ride Seat
Pioneer 200 watt stereo with bluetooth and remote control
heat and A/C
R4 tires
delivered for $41,500.00 out the door.

how did i do?

One of those "it depends" things. We got caught with a broke tractor and no time to wait, so we picked one on the lot. If I had time to wait, I would have gotten what you did along with three rear remotes TnT, cast centers defoggers and rear wiper.

I got only two rear remotes with hydraulic top link, bigger than OEM Ag tires, 12/12 hydraulic shuttle. I have an air ride seat base ready to install and we are running the grapple off a rear remote. We pull a 10' Woods DS1260 pull type rotary cutter.

I've got a mix of hills, flat ground, woods and a mix, so my needs are different than yours, so you may well have all you need. I highly recommend a hydraulic top link, I got mine from Brian at Fit Rite.

 

[BigBoyToys]

That thing is a BEAST!!!
Very Nice! :thumbsup::thumbsup:

 

[ovrszd]

Congrats on the new tractor.

A new tractor buyer's "additional options" list should only be limited by their budget. If no budget limitations, check every block!!!

 

[Farmer495]

Mine gets an annual wash and wax too.

One thing I'll mention if that is in fact an action shot: if you're just mowing, I really like to drop the bucket. I usually leave the loader on, but just removing the bucket improves visibility, improves maneuverability, and reduces front end wear. Give it a try. I leave my bucket and forks on the ground unless I'm using them.

Agree, I usually drop the whole loader, only takes a couple minutes to take on and off. Way better visibility.

 

[ovrszd]

Agree, I usually drop the whole loader, only takes a couple minutes to take on and off. Way better visibility.

Yep. I've brush cut twice with the FEL on. Both were less than 30 minutes.