My letter to Kioti, loader rerepair, long
- Thread starter Highbeam
- Start date
- Views: 60515
- Status
MOTractorman
Member
Looking at the front of the loader after repair.
MOTractorman
Member
MOTractorman
Member
The holes where the hoses gone into the brace.
MOTractorman
Member
With the inspection plate off, showing the flat stock welded at end of inspection plate. I noticed a significant increase in rigidity of the loader after the repair.
The only problems I have had so far is the holes cut in the angle iron are not in perfect line with the original holes in the brace. So when I went to put the inspection plate back on, two bolt stripped their threads and I was not able to put them back in.
I am submitting the pictures to Kioti to see their response about this fix.
The only problems I have had so far is the holes cut in the angle iron are not in perfect line with the original holes in the brace. So when I went to put the inspection plate back on, two bolt stripped their threads and I was not able to put them back in.
I am submitting the pictures to Kioti to see their response about this fix.
Attachments
MOTractorman
Member
With the inspection plate off, showing the flat stock welded at end of inspection plate. I noticed a significant increase in rigidity of the loader after the repair.
The only problems I have had so far is the holes cut in the angle iron are not in perfect line with the original holes in the brace. So when I went to put the inspection plate back on, two bolt stripped their threads and I was not able to put them back in.
I am submitting the pictures to Kioti to see their response about this fix.
The only problems I have had so far is the holes cut in the angle iron are not in perfect line with the original holes in the brace. So when I went to put the inspection plate back on, two bolt stripped their threads and I was not able to put them back in.
I am submitting the pictures to Kioti to see their response about this fix.
DaveNay
Platinum Member
- Joined
- Aug 13, 2003
- Messages
- 834
- Location
- Waterman, DeKalb County, Illinois
- Tractor
- John Deere 855 MFWD; Oliver 1850 Gas
</font><font color="blue" class="small">( I am submitting the pictures to Kioti to see their response about this fix. )</font>
Who did the painting with all that overspray? A roll of masking tape and yesterdays newspaper would have prevented that.
Who did the painting with all that overspray? A roll of masking tape and yesterdays newspaper would have prevented that.
DaveNay
Platinum Member
- Joined
- Aug 13, 2003
- Messages
- 834
- Location
- Waterman, DeKalb County, Illinois
- Tractor
- John Deere 855 MFWD; Oliver 1850 Gas
</font><font color="blue" class="small">( I am submitting the pictures to Kioti to see their response about this fix. )</font>
Who did the painting with all that overspray? A roll of masking tape and yesterdays newspaper would have prevented that.
Who did the painting with all that overspray? A roll of masking tape and yesterdays newspaper would have prevented that.
MOTractorman
Member
My dealer sent me to a welding shop that he deals with. He gave me a can of spray paint with instructions to have the welding shop paint the repair when they were finished.
MOTractorman
Member
My dealer sent me to a welding shop that he deals with. He gave me a can of spray paint with instructions to have the welding shop paint the repair when they were finished.
- Status