Justaplain
Gold Member
Tell him that the locust was green not dried. That makes all the difference in the world. If you can drive anything into dry locust it ain't. bcs /forums/images/graemlins/smirk.gif
Nail gun for fencing staples?
- Thread starter kubotasaurus
- Start date
- Views: 21231
NoTrespassing
Veteran Member
Until I can't swing a hammer I'll be using one. If the staples bend, get slightly shorter staples. It's great exercize! /forums/images/graemlins/smile.gif
Kevin
Kevin
CountryBoy
Silver Member
Amen to that............. /forums/images/graemlins/smile.gif
CountryBoy
Silver Member
</font><font color="blue" class="small">( slightly shorter staples )</font>
You got it . /forums/images/graemlins/wink.gif
You got it . /forums/images/graemlins/wink.gif
higgy
Platinum Member
- Joined
- Jul 7, 2003
- Messages
- 590
- Location
- mid-south idaho
- Tractor
- Kuota L3130, Ford 9-n, Allis AC, and a JD 4020 with powershift
Sorry, just could not resist, Like Ive never made a typo in my life /forums/images/graemlins/grin.gif ment on offence
I am with countyboy on this one. I use nail guns on a lot of projects, but when fencing the galvanized staples. One of the functions of the staple is that the sides drive at slighty divergent angles which makes pulling them out by pulling on the wire or post harder.
They make special set of plyers for this job, but I use these for setting and pulling the staples only, then drive them with a framing hammer.
If you can swing a sledge all day, my hat is off to you.
I am with countyboy on this one. I use nail guns on a lot of projects, but when fencing the galvanized staples. One of the functions of the staple is that the sides drive at slighty divergent angles which makes pulling them out by pulling on the wire or post harder.
They make special set of plyers for this job, but I use these for setting and pulling the staples only, then drive them with a framing hammer.
If you can swing a sledge all day, my hat is off to you.
