Need a Plow Share

[captaincrab55]

I need a plow share for a 3 point 1 bottom plow that I bought on ebay several years back... I couldn't find any markings on the plow frame, but found "Made in Brazil" on the Moldboard.. When I bought the plow Tractor Supply carried many types of shares and other wear parts. All of the TS stores close to me are a order only store for plow shares. Not having a manufacture name makes a simple order complicated... Just wondering if someone can chime in with a user friendly site or advice that may be able to identify my plow....

Thanks, Tom

 

[bullbreaker]

A pic or two will get you started on right path.
Boone
1 Timothy 2:5

 

[captaincrab55]

A few pictures....

 

[bullbreaker]

Measure between moldboard and share,that plow came in 12"or 14",m-board and share.I have the mp-114 sold by Worksaver.com(14").If 14" the part# from Worksaver is 2503290.Go to their site and you will see it.On their site go to product line,then discontued products.Also if you to Cheinc.net,you will see same plow,but they dont list their #s but they have pics of 12/14" plows.
As you can tell that plow has been painted over.I believe they were made or sold by originally by World Agritech Corp. out of Ohio,also known as International(not to be confused w-IH).
That part is pretty common.You should find easily with above mention companys or Agi-Supply or a site member like Ken Sweet.com.
If price quotes are in same ballpark,always good too buy from TBN family members IMHO.Please forgive my lousy pics my plow behind abunch of stuff with boom pole on top,and tractor in front in garage.
Boone
2 Corinthians 2:5

 

[captaincrab55]

Thanks BB, I have the 14" plow...

 

[bullbreaker]

Also BTW I could be wrong but in your pic#2 I only see 1 hole.Which tells me possibly at one time someone cut beam short, too mount on BX type tractor.Therefore you cant mount coulter wheel bar(u-bolts).Unless you drill hole behind existing hole and c-wheel has enough clearance from plow frame, if you were planning on using one in future.Of course this does not mean you cant use plow.
Boone

 

[captaincrab55]

Also BTW I could be wrong but in your pic#2 I only see 1 hole.Which tells me possibly at one time someone cut beam short, too mount on BX type tractor.Therefore you cant mount coulter wheel bar(u-bolts).Unless you drill hole behind existing hole and c-wheel has enough clearance from plow frame, if you were planning on using one in future.Of course this does not mean you cant use plow.
Boone

I just saw where the beam was cut in the middle of the hole... If I decide to go with a coulter, there would be a need to weld a piece back on....

I just figure out that I got the plow 8 years ago for less then $100 and it had a new share..... They wanted $85 for a cub plow share back then... I needed a new cub share every 3 or 4 years. I get double the life out of this type of share...

Again Thanks BB,

Tom

 

[sweettractors]

Thanks BB, I have the 14" plow...

If it is a International or IMC plow,and it does look like one, I probably can get one for you. If you want me to check into it, email me at sweet@scrtc.com Ken Sweet

 

[captaincrab55]

If it is a International or IMC plow,and it does look like one, I probably can get one for you. If you want me to check into it, email me at sweet@scrtc.com Ken Sweet

Email sent..

Thanks

 

[captaincrab55]

Also BTW I could be wrong but in your pic#2 I only see 1 hole.Which tells me possibly at one time someone cut beam short, too mount on BX type tractor.Therefore you cant mount coulter wheel bar(u-bolts).Unless you drill hole behind existing hole and c-wheel has enough clearance from plow frame, if you were planning on using one in future.Of course this does not mean you cant use plow.
Boone

Here's a close up shot of the beam, where it was cut off before I bought it...

 

[captaincrab55]

I got my new Plow Share and here's a few pictures..