Loader Need advice on adding a Quick Attach to a Ford 1920

[theghoul]

Recent owner of used model here..

The bucket was gone to **** when I bought it and I finally took back enough empty cans and bottles for the deposit to get another bucket setup.

My aim is to get a quick attach and a bucket that can have pallet forks added or separate attachments.

Pic attached.

My 7108 loader is using pins now. Any equipment, vendor or procedure recommendations?

What do you think about these guys?

Tractor Front End Loader Buckets

Did a quick search and saw JINMANS post for a TC-35
quick attache for tc-35 - TractorByNet.com

Does that apply for this model?

 

[gf5205]

When I wanted to add a grabber to my loader on my JD5205 I wanted the skid steer mounting on the grabber. I had two choices: replace the mount on the loader with a skid steer mount or get an adapter that has the JD bucket mount on the back and the skid steer on the front. Since I didn't want to replace my bucket I went with the adapter. I got it through my JD dealer but it wans't made by Deere. Since you're replacing your bucket I would change the mount. Check with your dealer as Jinman suggested.
Greg