Need help identifying a Ford backhoe.

[jptait]

I have a Ford back hoe, but I have no clue what model it is. I have uploaded a picture of the tag under the hood.
The tractor number is c689691
The model is cu411k
The unit number is 2f01b

Thanks in advance.

 

[ovrszd]

There are some very knowledgeable Ford guys on here. Hopefully they'll chime in. If you don't get an answer in a couple days, start a thread in the Ford tractor section.

While we wait, try this Google search information.

how to read ford tractor serial numbers - Google Search

 

[Opti-Mist]

The standard backhoe for the 3400/3500 was the 10 foot model 730.poer

C = power class, eg. 3000, 3100, 3400, 3500., 340 etc
U = Utility
1 = Diesel
1 = 8 Speed
K = PTO, probably None

This is tractor only, the loadet would be a Model 340, Backhoe 730

Don't remember so much anymore, been a long time since I was involved.
Serial number ranges for year are approximate as they were pulled before production was scheduled so late one year and early following year could have some overlap.

 

[jptait]

The standard backhoe for the 3400/3500 was the 10 foot model 730.

I probably should have elaborated more I need to know what the model for the whole machine is. I ran the numbers on the hoe and it came back as a 765. I searched the unit number and found a thread that listed what I believe is a different model but had the same unit number. The unit number came back as a build year of 1982.

 

[Opti-Mist]

Updated.

 

[azbinder]

Model CU411K= 3400 diesel. no pto, 6X4 trans.
Built 2F01B = June 1, 1972, Day shift.

3400 built from '65 to '75.

Is your tractor blue or yellow?

 

[ovrszd]

Model CU411K= 3400 diesel. no pto, 6X4 trans.
Built 2F01B = June 1, 1972, Day shift.

Is your tractor blue or yellow?

Good stuff, thanks!!

 

[jptait]

Model CU411K= 3400 diesel. no pto, 6X4 trans.
Built 2F01B = June 1, 1972, Day shift.

3400 built from '65 to '75.

Is your tractor blue or yellow?

Blue now but It might have been repainted.

 

[azbinder]

How did you determine you have a 765 backhoe? Also what is the loader # ? it should be on a plate on the inside of the loader arms, where the support plate is welded.

 

[jptait]

How did you determine you have a 765 backhoe? Also what is the loader # ? it should be on a plate on the inside of the loader arms, where the support plate is welded.

I ran the numbers I found on the data plate on the hoe. It was on the left side of the machine near the main pivot. It's a pretty big stick. Seems a little too big for the machine. I'll have to get the loader number tomorrow. I attached the only picture that shows most of the machine that I currently have. I can take more tomorrow.

 

[azbinder]

Don't know why but after looking at the picture, I'm thinking that the loader is from a later tractor due to the link type mount on the axle support. But the ID tag info makes it a 3400. Leads me to believe someone mounted a later loader/backhoe on you tractor.

 

[jptait]

Don't know why but after looking at the picture, I'm thinking that the loader is from a later tractor due to the link type mount on the axle support. But the ID tag info makes it a 3400. Leads me to believe someone mounted a later loader/backhoe on you tractor.

The component number is 19-801. The plate for the loader is painted over.

 

[azbinder]

The component number is 19-801. The plate for the loader is painted over.

Having a hard time finding out what the 19-801 fits. Been a long time since I worked for the dealer and I don't have access to the books any longer. I'll keep looking and see if I can find something for you.