That is what i thought too. However the on/off/auto for the PTO is an electronic switch on the dash.
The tractor is awaiting the shipment of the BH and fel, so I do not have it yet /forums/images/graemlins/tongue.gif. The dealer is also evaluating lengthing the wheel base once the loader is on.
I was leary /forums/images/graemlins/frown.gif at first about the wb extension until I drove a T-431 with the wb extended 10". What an improvement over the stock 431 /forums/images/graemlins/cool.gif. Smoother ride, better loader capabilities. Side note here: He had a Centry 2035 with a 10" wb extension and a GB 280 fel and no rear counter weight or implament attached. We lifted a 2100lbs 4x4x8 bale to max height w/o any issues or stability problems. Lowered it to mid height and trucked around w/o issue again /forums/images/graemlins/blush.gif. All this w/o and rear counter weight. I would not have believed it unless I saw it. /forums/images/graemlins/grin.gif
Back to the thread. That is the reason I am awaiting his evaluation of the 300 hst and wb extension.
The dealer is going to pull the manual out and check on it for me, I just hoped someone would know and I could find out sooner.
I will post pictures when I have some available.
