holliskat3
New member
Having problems with a 270 CLC John Deer hydrallic system being jerky any suggestions? Need help on Jerky 270CLC JD hydrallic system
- Thread starter holliskat3
- Start date
- Views: 851
Having problems with a 270 CLC John Deer hydrallic system being jerky any suggestions? oldnslo
Super Member
Does all of the functions jerk or just some of them?
I could not find the specs on your machine but I suspect it uses a load sense control system. If the load sense line is partially plugged or the pump control is hanging up slightly it would cause your system to respond sluggishly and potentially jerk.
Leak at the pump inlet would allow air to enter the system which would make the pump very noisy and could also cause the system to be jerky or spongy.
I could not find the specs on your machine but I suspect it uses a load sense control system. If the load sense line is partially plugged or the pump control is hanging up slightly it would cause your system to respond sluggishly and potentially jerk.
Leak at the pump inlet would allow air to enter the system which would make the pump very noisy and could also cause the system to be jerky or spongy.
Tx Jim
New Member
What type of machine is a JD 270 CLC??
