Mid-Mount Mower Need help, tc24d mid mower deck removal

   / Need help, tc24d mid mower deck removal #1  

dlmelton

New member
Joined
Apr 13, 2019
Messages
4
Location
london, ky
Tractor
03 new holland tc24d
New member, first time post...
Bought a 2003 new Holland tc24d with a front end loader and a mid belly mower. I am trying to figure out how the mower deck comes off. I do not have nor can I fine a book on removing it. And the person I bought it from has no ideal either.
Only reason I want to remove it is because when I lift the rear hydro hitch up a down with a box blade on it the belly deck moves up and den to.
Any advise greatly appreciated...
 
   / Need help, tc24d mid mower deck removal #2  
If you look under the tractor, towards the rear of the mower, there is a place to slide in a pin on each side to lock the mower up. The pins are approximately 3/8" x 6". To remove the mower, set the gauge wheels high, lower to the ground, pull the four pins on each corner of the linkage, and disconnect the PTO shaft. Since you have a loader the easiest way is to then lower the boom and pick the front tires of the tractor off the ground, and roll the mower out the front.
 
   / Need help, tc24d mid mower deck removal #3  
If you look under the tractor, towards the rear of the mower, there is a place to slide in a pin on each side to lock the mower up. The pins are approximately 3/8" x 6". To remove the mower, set the gauge wheels high, lower to the ground, pull the four pins on each corner of the linkage, and disconnect the PTO shaft. Since you have a loader the easiest way is to then lower the boom and pick the front tires of the tractor off the ground, and roll the mower out the front.

Exactly!
 
 

Tractor & Equipment Auctions

500 BBL FRAC TANK (A58216)
500 BBL FRAC TANK...
Wacker Neuson ET90 (A57148)
Wacker Neuson ET90...
2025 Leopard F50 X-pro Mini Dirt Bike (A56859)
2025 Leopard F50...
Giyi Mini 39" Vibratory Roller (A57149)
Giyi Mini 39"...
2158 (A58376)
2158 (A58376)
UNUSED FUTURE EQUIPMENT SEAT (A58376)
UNUSED FUTURE...
 
Top