I know little about hydraulics. I have a Kubota 37.10. I took the bucket off recently and when attaching the snow blower I have no power to the blower. The bucket worked fine but the blower has nothing. Can anyone point be in the right direction?
Need help
- Thread starter hb1
- Start date
- Views: 779
J_J
Super Star Member
- Joined
- Sep 6, 2003
- Messages
- 18,973
- Location
- JACKSONVILLE, FL
- Tractor
- Power-Trac 1445, KUBOTA B-9200HST
Did you use the curl spool for the hyd?
If you plugged your hyd snow blower into the regen side of the spool, you will not have any flow. You could go to the far right and lock the lever for continuous flow.
You could use the curl up as the supply for the hyd motor and bungee the lever open.
If you plugged your hyd snow blower into the regen side of the spool, you will not have any flow. You could go to the far right and lock the lever for continuous flow.
You could use the curl up as the supply for the hyd motor and bungee the lever open.
