Need help

   / Need help #1  

ben21921

Member
Joined
Jun 10, 2017
Messages
32
Location
Elkton, Maryland
Tractor
none/ yet
Have a fairly new LS xr3037 H I was getting ready to mow so I took the bucket off and after I took the bucket off the front end loader will not raise or lower it will tilt and curl fine but something feels like it's stuck when I try to raise or lower it any suggestions?
 
   / Need help #2  
In front of the joy stick, there is a little silver tab that you can push in to lock out the stick. check to see if you hit it by accident. Pull hard on it to get it to unlock. I did it to mine when it was new.

George
 
   / Need help #3  
Sorry, I was wrong. I went out and checked my XR3135HC, and it is not the little tab, your joystick has gotten pushed forward into float position, pull back hard on the stick and it will snap back to where it should be. When new they snap hard or stick
George
 
   / Need help
  • Thread Starter
#4  
That was it thanks so much. I read that in the Manuel but your right I really had to pull hard. Thank you
 

Tractor & Equipment Auctions

2007 Honda CR-V SUV (A53424)
2007 Honda CR-V...
2014 MACK GU713 WATER TRUCK (A51247)
2014 MACK GU713...
UNUSED RAYTREE RMVR76 - 76" HYD VIBRATORY ROLLER (A54757)
UNUSED RAYTREE...
2001 CHEVEROLET C6500 3 CAR ROLL BACK (A54607)
2001 CHEVEROLET...
2020 CHEVROLET Z71 TEXAS EDITION TRUCK (A51406)
2020 CHEVROLET Z71...
UNUSED IRANCH 16" EXCAVATOR WOOD GRAPPLE (A54757)
UNUSED IRANCH 16"...
 
Top