NEED info please...

   / NEED info please...
  • Thread Starter
#11  
Well thanks for all the info gents I have managed to fix the starting for now.. I removed the solenoid and disassembled it. The Battery and Starter contacts were not making a connection. Some cleaning and sanding of the terminals and back in business. 31 Degrees here and fired right up with the help of the glow plugs (a count to 10). Next I am going to post about my gauges not working after I look at the forum to see if there's any info already there to keep from reposting..

Thanks again

Dan
 
   / NEED info please... #12  
Sounds like the guys are getting you ironed out. I see you are a Indiana boy also and have "fly" in your name.

I am in the Anderson/Muncie area and a corporate pilot with a Jinma. Do you fly or maybe a controller? Also where are you located?

Sorry to get off topic but just wanted to say hi. You are going to get good advise here.

Chris
 
   / NEED info please...
  • Thread Starter
#13  
A controller at Indy Center live between Martinsville and Bloomington. I have 13.5 acres to care for..
 
   / NEED info please... #14  
Very cool. I fly N964C Sabre 65 out of Muncie.

Chris
 
   / NEED info please... #15  
YD380 is chinese yangdong engine, 3 cylinder and Bore is 80mm, so it called YD380 engine, it is a 20HP engine.
 
   / NEED info please... #16  
glad you solved the issue, please keep us up to date on the others.
 

Tractor & Equipment Auctions

2007 Reitnouer 40 Ton T/A Heavy Haul Flatbed Trailer (A52377)
2007 Reitnouer 40...
2014 DRAGON 500 BBL FRAC TANK (A53843)
2014 DRAGON 500...
2011 Mack GU713 Granite Cooper TM-1882 18 Ton Crane Truck (A53422)
2011 Mack GU713...
2022 Big Tex 22GN-35BK+5MR 40ft T/A Gooseneck Equipment Trailer (A51691)
2022 Big Tex...
2012 LEEBOY 8515B APHALT PAVER (A51406)
2012 LEEBOY 8515B...
John Deere 333E (A47477)
John Deere 333E...
 
Top