Need JRW Snowblower Impeller blade

[Blowingsnow]

Hello,
I need to replace impeller blade for 2004, Model S70 JRW blower, 26" fan, four blades. Welder says he can fix but might take 6 or more hours, It's pretty beat up from years of blowing rocky roads! I understand JRW is no longer in business? Might just have the welder go to it, but thought I'd ask around. Thank you!

 

[Reb954]

You might take some measurements then measure other blower brands to see if one of them will interchange with yours.

 

[Working on Rust]

What is the depth of the drum and the gearbox shaft size? 26 inches is a very common snowblower fan size but the depths do vary.

A few years ago we had to check about getting a 26 X 10 fan made and the quote was $6-700 Canadian.

 

[Blowingsnow]

You might take some measurements then measure other blower brands to see if one of them will interchange with yours.

I'll do that, thanks!

 

[Blowingsnow]

I'll have to measure and see, thank you!