NEED MULCHING VIDEO

[Robbie Hegwood]

Hey Mark.

Yes the alt. and A/C are under warranty. The A/C is rework, they can't find the leak. It takes about 3-4 weeks for all the refrigerant to leak out. I bought an extended powertrane and they are good about helping out with other little items.

Yes I would bye another one. For the money, power, and versitility they are still hard to beat. But for a soully dedicated mulching tractor there are a few other manufacturers coming out with new tractors that are attractive. But for the do everything machine I still like the 100.

I still think the perfect head for these tractors has yet to be discovered. I think the fecon is the best head for 100 out right now but I'm still looking. I have a few leads on two other heads that look promising, we'll see.

I very much like the forestry package ASV is using and wouldn't have another 100 without it, just not worth the money out of pocket for me to do now. I run my 100 personally and I usually keep it out of trouble. If I had an operator it would be a different story. Hired help is usually rough on equipment.

I think you will be very happy with your setup and I hope your dealer gives you good service. I have a super dealership and that takes alot of stress out of it.

Good mulching, Robbie

 

[Mark One]

Thanks for the feedback. I did a LOT of homework and it makes me feel confident in my decision that you are running one and have this kind of opinion.

Hope you stay good and busy.

Thanks
Mark

 

[Terra Firma Scott]

I may also be jumping on the ASV scene since I SMOKED my CAT 257 HF Turbo due to the air inlet pipe came off in the woods while mulching-who knows how much dust/chips/crud it sucked up -and also now have TONS of blow by..running hot..3 days running the Timber Ax...Not what I need after chunking out for the head......This is gonna hurt....

Murphy's Law-and not a good week..........

Anyone look at the SR 80? it will match the head I just bought...Flow and PSI

 

[Mark One]

Bummer, Sorry to hear about that.

I dont know where you are located, but the dealer that I purchased my RC 100 from is located in Mechanicsville VA and so far has been top shelf. Let me know if you need any contact help. There is Bobcat, Fecon, Deere, Cat, Case ETC... all within 20-30 minutes from here so shopping has been pretty easy. The internet has helped with shopping the deal once I made up my mind what I wanted.

Thanks
Mark

 

[Robbie Hegwood]

I gave my 1 week notice Friday night. Went to a job today and a wheel came off my trailer. I think Murphy and the devil are one in the same. Pulled the other wheel off same axle and went home only to have my daughter call and say she heard something down by the trailer. Had FIL go look, one of the two tires left on one side flat. I hope 1 rim and 1 tire can hold half of 17k lbs. till I get home. Now I know Murphy and the devil are the same. Robbie

 

[DirtyWorks]

Mulching hard knocks - I have since broken a hydraulic fitting and then next day a line in the area of the quick disconnects. Highly recomend the gaurd Hahns makes for the area. Called this morning and was quoted $168 for it. Will be ordering it today! Sorry to hear about the cat, scott. especially after droping the $$ on the head. From what I've seen the SR80 may well be your ticket. Just consider an aftermarket type hydro-cooler and some armor. Robbie you should be fine for a short pull. Keep us informed of all updates.

PS anyone ever had trouble with the track hydro lines? Hans makes a guard for these as well.($220 a set) I can only imagine the trouble of changing one of these lines in the field

 

[DirtyWorks]

Also I believe I have A/C trouble. Dosent seem to cool and its not even hot here yet. guess i will take her to shop on the next down day.

 

[Terra Firma Scott]

Mark, Robbie, Dirty thanks...Sounds like we need to find MURHY and MULCH him....lol.. Hard Nots is right and I guess things like this should be expected.well some things anyway-Engine is extreme example.Guys check your INTAKE systems and make sure your clamps are tight anywhere and everywhere from the Air filter to the inlet of the Turbo!!! heck even the outlet....Who knows how many R's that turbo is singing but I assure you it will suck in some unfriendly "stuff"...Looking like a NEW not reman complete engine assy with Turbo gonna taste like 7-8K...Installed...As bad as I would like a new machine I need to give this another whirl and WAIT .Also Cat has 2 new models the 287C not B and the 297C...287 comps to SR 80 and 297 comps to RC 100...Both High flow and Positive Pressure Cabs...I will be installing the loftness add on HYD oil cooler also ..Mo Money, Mo Money...

Hope you all have a better week!

Scott-

 

[Robbie Hegwood]

Hey guys. ASV has a guard for the quick connect area and I think was only 50-60$. Check and see. I have become very dependent on mine. If I use a loaner without one the first area a tree lands is on the couplings.

I have also seen Loftnesses aux cooler and it looks pretty good. You can't have too much cooling.

I second the SR70/80. Reported as having an excellent A/C. Also tracks system is ideal for mulching. Very open and will walk over debri keeping tractor very stable. Funny thing, the new big cat CTL is using the SR type track system. How about that?

Yes scott, while mulching today with my tractor wide open I too thought about checking the inlet system. Sorry to hear about all the expenses. There is nothing cheap about a mulching business!!!

I'm having my saleman bring a Loftness C2 out tomorrow and give her a whirl. I'm killing my poor timberax. Every job is 6" plus material somewhere.

I friend runs all cat equipment and a cat salesman took him to lunch and was bragging on the new big cat, talking about the positive pressure cab. My friend asked if he was ready to put money on whether dust would get in, he said NO.

FIL took trailer to the manufacturer today and they are loving on it. He'll go pick it up tomorrow. They siad no big deal and would fix for about 200.00. New studs and a wheel/tire. Not bad, they said they will get it a good once over while it was there. Good company!!

Later Robbie

 

[DirtyWorks]

Robbie, guess what I ment to say was the area where the quick attach plate for the tools is, not the hose place on the arms. The two cylinders the high dollar asv forestry turned into manual latches. Charge you more and take sumthin away oh well. yes i do have asv's hose connector guard and it it well recommended I will be getting Hahns plates for the track motors soon too! they are cheap compared to all those hoses unprotected