Snow Blade need new snowplow
- Thread starter gravelman
- Start date
- Views: 2420
Thomas
Epic Contributor
- Joined
- Apr 6, 2000
- Messages
- 30,970
- Location
- Lebanon,NH.
- Tractor
- Kubota B2650HSD w/Frontloader & CC LTX1046 & Craftman T2200 lawn mower.
Your Kubota dealer should be able to help $$$$'s try Fisher & Boss & Curtis dealers.
Rustyiron
Super Member
Over a "trip edge"?
Do you have a welder? Modifying a used truck plow is a pretty easy project. Ideally you'll need a hydraulic circuit (3rd function) on your tractor.
Rustyiron
Super Member
Perfect, plows have become stupid expensive and I and a few others here have some P.U. plow build threads if your interested in that route. I have the measurements/angles to build the ssqa.
As there's snow on the ground now, you may not have the time. I bought a "Snow Wolf" brand plow and it's been very tough. The 10,000 pound skid loader it's used on has no mercy on it and after 10-12 years, it's doing just fine. Skid Steer Plows, Skid Steer Snow Tires, Snow Pushers | SnowWolf Plows They have a dealer locator and iirc, Milton Cat is one.
As there's snow on the ground now, you may not have the time. I bought a "Snow Wolf" brand plow and it's been very tough. The 10,000 pound skid loader it's used on has no mercy on it and after 10-12 years, it's doing just fine. Skid Steer Plows, Skid Steer Snow Tires, Snow Pushers | SnowWolf Plows They have a dealer locator and iirc, Milton Cat is one.
Avondale
Platinum Member
I Have an HLA Plow, very heavy, great quality. If you use hyd to angle plow, ensure you have a cross-over relief system.
HLA Snow | 2 SnowBlade
HLA Snow | 2 SnowBlade
Rustyiron
Super Member
They (HLA) make some real nice plows!
coobie
Super Member
- Joined
- Sep 19, 2004
- Messages
- 6,302
- Location
- S.Michigan
- Tractor
- Kubota RTV 1100c, JD 740,Kioti DK 40 with KL401 loader .
Purchased mine from Michigan Iron & equipment Morrice MI..Very stout set up..
Or just pull the loader off, drop 2 brackets off the tractor frame and add a raise/loader cylinder. Use the loader controls to do all the functions. You don't need pitch control if you set it up right, you need raise/lower and you very much need angle left & right.
Also, connecting and reconnecting couplers may not be practical if one gets pressurized. You will have to bleed it off to connect it.
Also, connecting and reconnecting couplers may not be practical if one gets pressurized. You will have to bleed it off to connect it.
