Need Picture of frame mount backhoe.

   / Need Picture of frame mount backhoe. #11  
The front mount looking from the rear, is the black angle w/ tubes on either end. The red and gray mount is for my 7' Meyer snow plow.
 

Attachments

  • 687991-hoe sf 4.jpg
    687991-hoe sf 4.jpg
    73.3 KB · Views: 284
   / Need Picture of frame mount backhoe. #12  
Hoe installed at front mount, 3/4" bolts get inserted in the tubes.
 

Attachments

  • 687995-sf 8.jpg
    687995-sf 8.jpg
    34.1 KB · Views: 248
   / Need Picture of frame mount backhoe. #13  
Hoe sits farther back than you want but it allows me to keep all the three point linkage on w/ it installed. Also allowed me to mount it lower so I no longer hit my head on the ROPS.
 

Attachments

  • 687999-sf 11.jpg
    687999-sf 11.jpg
    37.8 KB · Views: 279
   / Need Picture of frame mount backhoe. #14  
Poor detail pic of frame on hoe, will get better if you want. This was built with all scrap metal. Long rails are 4" channel, plated w/ 3/4" at hoe attachment than 3/8" the rest of the length. Cross pin is 1 3/8" if I remember correctly. Like everything else I build, needs paint-just can't get past making it functional and on to the next project.
 

Attachments

  • 688006-sf 5.jpg
    688006-sf 5.jpg
    41.9 KB · Views: 251
   / Need Picture of frame mount backhoe.
  • Thread Starter
#15  
Thanks Bill_M, very ingenues idea with the slide in bar at the back. Do you still use the top link as another attachment point. Maybe I'm being too cautious, but at 1000+ lbs, I want to get this right the first time. Your pictures have been very helpful.
 
   / Need Picture of frame mount backhoe. #16  
Bigbear,
Thanks, credit can actually go to Pine Ridge, he gave me this drawling when I asked for help.
No I don't use the top link, I remember how hard it was to get the bolt out of the hole with the hoses in the way when I took the 3 point hitch off. There is no way I am going to try to pin a top link in there if I don't have to. I have no fears of breaking anything the way it is built even when moving the 'bota with the hoe.
 

Attachments

  • 688673-SUB FRAME.gif
    688673-SUB FRAME.gif
    57.5 KB · Views: 252
   / Need Picture of frame mount backhoe. #17  
Here is a better pic of the sub frame.
 

Attachments

  • 688675-sf14.jpg
    688675-sf14.jpg
    81 KB · Views: 252
   / Need Picture of frame mount backhoe. #18  
And last, the top link portion of the mount.
 

Attachments

  • 688678-sf15.jpg
    688678-sf15.jpg
    53.2 KB · Views: 246
   / Need Picture of frame mount backhoe. #19  
There is some pics of my new Woods 4 point hoe in the kioti forum. The mounting frame stays on the tractor and the hoe connects with 4 pins / bolts. It's real nice.
 

Tractor & Equipment Auctions

2017 Dingo TX1000 Stand-On Track Loader Skid Steer (A46683)
2017 Dingo TX1000...
84in Bucket (A49251)
84in Bucket (A49251)
1,000kg Semi-Electric Hydraulic Pallet Stacker Forklift (A49346)
1,000kg...
2006 International SA525 Vac-Con V390LHA Combination Sewer Jetter Vacuum Truck (A46683)
2006 International...
2018 KENWORTH T680 TANDEM AXLE SLEEPER (A45679)
2018 KENWORTH T680...
60" Pallet Forks, New (A47371)
60" Pallet Forks...
 
Top