Need sections and rivets-Enorossi mower

[Darren]

The dealer sold me a box of sections which turned out to be the wrong ones even though they supposedly came from the distributor that sold the mower. My guess is they didn't.

The holes have a dia. slightly larger than 6mm. From base to tip the knife sections measure 88mm.

Anyone have a source?

 

[hobbyfarm]

</font><font color="blue" class="small">( The dealer sold me a box of sections which turned out to be the wrong ones even though they supposedly came from the distributor that sold the mower. My guess is they didn't.

The holes have a dia. slightly larger than 6mm. From base to tip the knife sections measure 88mm.

Anyone have a source? )</font>

Darren,
I don't have a source, but, you may email the manufacturer for dealer info. Why not? Can't hurt, right?

<font color="brown">Enoagricola Rossi</font>

BTW,
This website you can find all sorts of obscure Italian equipment brands.

<font color="red">Italian Farm Machinery</font>
Just click "search".
Good luck.

 

[Darren]

Thanks for the reply. I ended up talking to Cummins & Bricker who is the distributor. They confirmed that they had the parts in stock. I finally found the sections at a dealer a couple of counties away. He only had six, so I bought all of them.

 

[JRobyn]

Next time, also try

http://www.sicklesections.com/

Mostly US stuff, but very helpful folks and can probably match yours.

 

[Darren]

I had seen that website when I did a search. One of the problems is the sections on the mower are metric. I couldn't find anything close that was pictured on the internet.

 

[sweettractors]

The next time you need some wear parts for that mower, Give us a call at 270-528-3323-mon-fri-8-5-cst or email sweet@scrtc.com . We dont handle that specific brand, however, I think I can crossover most of your part needs--Ken Sweet