Need some help with a PTO shaft cover

   / Need some help with a PTO shaft cover #1  

lzicc

Platinum Member
Joined
Jul 20, 2009
Messages
723
Location
Pittsburgh, Pa
Tractor
Kubota B2650
I bought a King Kutter tiller and the cover that goes over the PTO shaft on the tiller end is off. I have the white plastic clip that goes over the shaft that holds the cover on, but I need to take the cover apart. You can see that it comes apart into 2 pieces, but I cannot figure out how to do it. If you look at the second picture, you can see towards the bottom of the cover that there is a hole with a black plastic thing in there. I can put a screw driver in it and turn it but am not sure if that has anything to do with splitting the two. Any help please?

P2276154.jpg


P2276155.jpg
 
   / Need some help with a PTO shaft cover
  • Thread Starter
#2  
I finally figured it out. The two pieces on the end do not come off, they have to rotate. This link helped me out. I figured I would post it just in case someone else has this same issue.

Link
 
 

Tractor & Equipment Auctions

2014 International DuraStar 4300 4x4 Terex BT3063 63FT 15 Ton Crane Truck (A51692)
2014 International...
Metal Rooster Statue (A55758)
Metal Rooster...
LOT LOCATIONS (A56129)
LOT LOCATIONS (A56129)
JOHN DEERE 410L BACKHOE (A52706)
JOHN DEERE 410L...
Safety Basket (A53316)
Safety Basket (A53316)
Self Dumping Hopper (A53316)
Self Dumping...
 
Top