Need some help!

[BriansViper]

I have a b7800 Kubota and installing a quick attachment on the bucket. Installing it on the tractor was know problem but the bucket is a different story. I cut off the pins attachment on the bucket. My question is how do I determine the height of the plate?

 

[BriansViper]

Well, the welder is coming out in the morning. What I can up with is the bucket plate is about 1" above the bucket, seems like any lower the bottom of the plate will be too low and will hit the ground when I back scrap with the bucket down and curled up.
I hope this is right.

 

[BriansViper]

Everything worked out perfect.

Thank you

 

[Don87]

Everything worked out perfect.

Thank you

Glad to hear you got it worked out, and welcome to TBN. These kinds of things need pictures, they help a bunch.

Don't forget to post pictures of your completed bucket.