skidsteer.ca
Gold Member
I have a skidsteer cement mixer that operates on up to 20 gpm flow to turn the mixer, I'd like to split a small portion of that flow off to control a 2" double acting cylinder with a 6" stroke to control a side discharge door. (presently run of a air cylinder that requires the air tank recharged every 15 or so cycles)
Should be power on for open or close and spring centered to hold the cylinder in a statonary position.
Surplus Center has some but the base plates ports are only #6 and would be to restrictive I think. (we use 1/2 " hose)
Does anyone else have a source for simular valve with larger ports?
Ken
Should be power on for open or close and spring centered to hold the cylinder in a statonary position.
Surplus Center has some but the base plates ports are only #6 and would be to restrictive I think. (we use 1/2 " hose)
Does anyone else have a source for simular valve with larger ports?
Ken