jjmarotz
Gold Member
Shank is 41.5" total, with 20" useable length.
Need to make up a sub soiler, what angle for the ripper tooth?
- Thread starter Blagadan
- Start date
- Views: 21993
bucmeister
Silver Member
Always wondered why small tractor owners don't opt for the parabolic design of subsoiler tooth. It seems that is what all the "real" farmers use. Supposedly it takes less HP to pull.
Like this
Like this
sandman2234
Super Member
- Joined
- Dec 4, 2005
- Messages
- 6,654
- Location
- Jacksonville, Florida
- Tractor
- JD2555 and a few Allis Chalmers and now one Kubota
Bucmeister,
One reason a lot of people don't opt for that type of middlebuster is the other type can be used to plow a ditch. I just used mine to add a ditch to the road going to my sister in laws house, and if I had one like on ebay, I would still be digging the dirt out of the hole. However, for the purpose you use it for, opening the ground up for the winter rains, the one on ebay would do fine, with less horsepower requirements, and probably do a better job, with it's 3 points of contact.
David from jax
One reason a lot of people don't opt for that type of middlebuster is the other type can be used to plow a ditch. I just used mine to add a ditch to the road going to my sister in laws house, and if I had one like on ebay, I would still be digging the dirt out of the hole. However, for the purpose you use it for, opening the ground up for the winter rains, the one on ebay would do fine, with less horsepower requirements, and probably do a better job, with it's 3 points of contact.
David from jax