Needed 1 1/8 threaded grade 8 or higher

   / Needed 1 1/8 threaded grade 8 or higher #1  

scurvy

New member
Joined
Oct 19, 2002
Messages
13
I would appreciate a good reference to purchase on line a piece of 1 1/8 thread stud/rod, grade eight or higher,preferably threaded on the ends and smooth in the middle,needs to be at least 7 1/2"long.

Thanks

The Scurve
 
   / Needed 1 1/8 threaded grade 8 or higher #2  
I looked in your profile and found nothing as to where you live, but if you live anywhere near any oilfield you could check an oilfield supply co. such as National Oilwell, or if not oilfield any good Industrial supply company should be able to help you, or direct you to where you can find what you need. Check Yellow Pages for Industrial Supplies, maybe. Good luck,
Don
 
   / Needed 1 1/8 threaded grade 8 or higher #3  
You can find it here; <A target="_blank" HREF=http://www.mcmaster.com/>mcmaster carr supply co</A>
I can't post a url to the exact page, they're pdf files, but look under fastening and sealing, threaded studs and rods. They have a number of grades and styles.

I have dealt with the company in the past. They are first rate, will have the item in your hand in a couple of days at a fair shipping cost.

Dave
 
   / Needed 1 1/8 threaded grade 8 or higher #4  
Any Caterpillar dealer should be able to fix you up.Cat uses nothing but grade #8.sae and nc. Sid
 

Tractor & Equipment Auctions

2015 Ford F-550 Godwin 184U Crew Cab Mason Dump Truck (A48081)
2015 Ford F-550...
4- 6 DRILL COLLARS (A50854)
4- 6 DRILL COLLARS...
2014 New Holland T8.360 MFWD Tractor (A51039)
2014 New Holland...
STS MUD MIXING MACHINE (A50854)
STS MUD MIXING...
2012 Cottrell EZ-4807 22.5 Ton Car Hauler Trailer (A50323)
2012 Cottrell...
2013 Ford F-550 4x4 Ext. Cab Auto Crane 6406H 6,000LB Crane Service Truck (A50323)
2013 Ford F-550...
 
Top