New Bobcat CT 450 Cost?

[dodge2]

I was wondering on what a new Bobcat CT450 would cost with a cab and loader. None of the dealers around me have one in stock, and for this reason don't want to give me a price. Can someone please help me, even if its just a ball park price(either USD or CAD).

 

[wallace]

Want a price on a Kioti DK45SE hydro cab it's the same tractor with a better loader and better warranty.
Where are you from?

 

[dodge2]

I'm from Ottawa Ontario, but I don't mind traveling to the US. if there is a big difference in price. But mostly I am wondering on how good of tractors these are and what their price is because I can't seem to get any anwsers.Could you please help me out even if its just a ballpark price.

 

[tractorman99]

There is one on tractorhouse.com that said Listed price is $36.415


Tractor House link - 2008 BOBCAT CT450 40 HP to 99 HP For Sale At TractorHouse.com

 

[wallace]

I'm from Ottawa Ontario, but I don't mind traveling to the US. if there is a big difference in price. But mostly I am wondering on how good of tractors these are and what their price is because I can't seem to get any anwsers.Could you please help me out even if its just a ballpark price.

Check your PM's

 

[GDFBobcat]

A CT450 with cab/heat/AC and a front end loader lists for about $35,500 and I currently have one in stock. There is currently 0% Financing available and as for the warranty claim... Bobcat offers 2 years 2000 hours full warranty and 3 year 2000 driveline. I am located in Minnesota, if any one has questions please feel free to contact me. 507-831-5342 ask for Bill

 

[wallace]

Bill what is the lifting capacity on the front loader?

 

[GDFBobcat]

2050 lbs

 

[tractor virgin]

Looking at the Bobcat specs I see 2600 lbs at the bucket pivot with the correct rear ballast.

 

[GDFBobcat]

That is correct, I was referring to the rated lift specs
Loader Lift Capacity (if equipped) measured at 19.68 in. (500 mm) in front of pivot .......... 2050 lbs.

That is the published lift capacity

But that does bring up a good point, Kioti rates their loaders at the pivot pin and Bobcat rates theirs 500 mm in front of the Pivot pins. If you compare them at the same points they are with in about 100 lbs of each other.

 

[Slackdaddy]

I would be very "carefull" with any loader specs provided by Bobcat.
They "overrate" (fib, lie, strech the truth) on the Rhino provided loaders.
below is a paste of an older post.

++++++++++++++++++++++++++++++++++++++++++++++++++++++
Just got off the phone with an engineer with Bobcat, The rhino loader they are using are NOT spec'd the same as the ones Rhino is listing on their site, that Bobcat had Rhino make changes.

These are the numbers from the Bobcat engineer:
CT120 (6TL loader) - 1140lb at the pins
CT225-230 (7TL loader) 1605lb at the pins


Update #2

Just got a return call from an engineer at Rhino, He say's no, nothing special about the 6TL and 7TL loaders going on the Bobcat tractors, and quoted the Rhino 6TL and 7TL specs (850, 1035 at the pins)

Who do You believe?

+++++++++++++++++++++++++++++++++++++++++++++++++++++++

So who "do" you beleive ?

 

[sevensandeights]

As you guys may have already heard, Bobcat has slashed their prices on tractors. My local dealer has an advertised (cash) price for a standard package CT450 with 9TL loader and cab for $26,665.

 

[777777]

Yup, ifyou are referring to the Bobcat dealer in Waterford, he does have some good cash prices on the go.
Advertised on Craigs list with the 122 & loader for 10675, CT235 & loader for 12998 and the CT450 for 21125,

All cash pricing.

Have a good one.