Loader New GC1723e

[MoMower]

Did find a first world problem, complaint to make.

Due to the loader control location on the new machines, my right calf hits the 3 point lift lever and it’s not as easy to get on from the right side of the machine.

Not a big deal and wouldn’t change the loader joystick back. Just an observation.

 

[2544Cubby]

MoMower, can you measure the height to the ROPS on your GC1723E and post.

I can't find any info on it and I want to make sure it will fit through my garage doors.

Thanks

 

[MoMower]

I can, but it’ll be a bit, I take the top half off in summer. They do fold though.

 

[joshwill101]

On the GC1723/25 I do believe the ROPS on the TL is shorter and doesn't fold. On the TLB the ROPS is taller and folds.

I have the TLB: ROPS Folded is 63in, ROPS in position is 84in.

I am pretty sure the TL version ROPS will fit fine under a standard 7' garage door, the TLB has to be folded, mine does at least.

 

[2544Cubby]

Thanks for the replys,

I'm going to assume that the fixed ROPS on the GC1723E will fit thru a 7' garage door. It would'nt make sense not too.

 

[aamyotte]

Thanks for the replys,

I'm going to assume that the fixed ROPS on the GC1723E will fit thru a 7' garage door. It would'nt make sense not too.

I have the 1723E without the backhoe and fixed ROPS. It is about 6'-4" high. It fits in my shop with double swing doors and a height of 78". I can provide a better measurement this evening if you need.

 

[Imold]

I have the GC1705 and it fits in my garage with the 7foot door, I also have a Sunshade on it so it痴 a bit taller and it still fits, just make sure the door is open all the way.

 

[2544Cubby]

Thank you for the comments,

My garage door opening is 76", so it will be a very tight fit.