New HLA Snow Plow

[r40kh]

Probably could skyhook but with my luck I'd end up bending something by setting the relief higher than the factory setting so I'll just put up with it. It's not that much of an issue anyway just annoying sometimes

 

[FatTire]

Great plow, and a really good match for your tractor. As requested above, please post some more pics after you get it. I'm running a heavy v-plow, but if I wanted a straight plow this would be the one. (Or the 3000.)

 

[WilliamBos]

It does look well built but doesn't look like the plow will float,may or may not be a problem for you.
Looks more like a "dozer"type blade than a snow blade.

They have skids and float just fine. You need a heavy built blade/blower for snow removal equipment, you don't want tin, which there is too much of out there.
HLA has been building this equipment for decades, and sell by the truckload.

 

[devildog1]

OK so the dealer brought over my new HLA snow plow this morning and we took off bucket and hooked up the ssqa snow plow. Dealer wanted plow onto tractor so he could measure the length of the two new hydraulic hoses to be made up.The feature of the lateral float system is quite the bomb, it allows the blade to follow the contours of the ground. Everything is heavy duty steel, unlike some of the tinny snow plows that I looked at before I ordered this one.I adjusted the skid shoes so plow cutting edge is about 1" from ground, pick up hoses in day or two and install, be all ready for the snow in about 7 months or so,lol,lol. Thanks guys for the feed back.
DevilDog

 

[peterc38]

Very nice set up. I gotta get me something like that. My BIL has an HLA snow pusher and that thing is well built. :thumbsup:

 

[Tractor Tom]

I ran my HLA plow all winter, over 70hr's of plowing. Didn't use, didn't need the bucket at all. Very well build and does the job.

 

[farmeratheart]

devildog,

That is a nice looking plow setup. If we got more snow here I would have to have one of those!

Thanks for sharing.

Frank