New holland switch

[Firemanbob]

Need help wiring switch tc 45 connector in back of ignition switch is bad jinman show where original wires go on the switch you replaced original switch with napa switch can't get the wiring right for it to run

 

[Jackfr]

I changed mine over to a NAPA but you need to make sure you get the right switch. Check out this thread here for help with wiring and NAPA switch part number

 

[jinman]

Bob, I'd love to help you, but you must have me confused with someone else. I have never replaced my ignition switch in my TC45D. It's the one that came with it when I bought it from McMaster's. You do have good schematics in your Owner's Manual in the back. I use mine all the time for wiring issues. If you can read a schematic, it will solve your problem.