csmoak25
New member
Wanted to share my fix with my no start no engine turn over
The white wire furthest to the right on the back of the ignition plug in that goes to the small pink wire on the starter solenoid Somewhere between the two ends it was dropping voltage and not enough to make the stsrter turn the engine at all. I spliced In to the back of the ignition into the white wire and run it through the hole where the throttle cable runs out the engine and then tied it into the pink wire on the starter!!!!
Only thing I can tell right off that it bypassed was allowing it to be started in gear
Will keep you posted if I run into any issues
The white wire furthest to the right on the back of the ignition plug in that goes to the small pink wire on the starter solenoid Somewhere between the two ends it was dropping voltage and not enough to make the stsrter turn the engine at all. I spliced In to the back of the ignition into the white wire and run it through the hole where the throttle cable runs out the engine and then tied it into the pink wire on the starter!!!!
Only thing I can tell right off that it bypassed was allowing it to be started in gear
Will keep you posted if I run into any issues
