Ken Kegris
Bronze Member
Koua
I would think you are more talking to brewmaster than me.
I have a loader for the CK25 Its like new and haven't used it in 6 years. I bought mine separate of the tractor since knowing the dealer he left me make mine up out of parts in a trailer that he purchased from Kioti. 2000.00 Like new it has a mismatched cylinder, and the part that was for the back hoe I cut off and painted with Allis Chalmers paint which was a perfect match. I also understand Kubota II paint is a match. I bought some and it was a little lighter. I had to make my own leveling rod.
Since I have a 8X8 with shuttle its a little unhandy for the loader. for snow I have a 7 ft back blade power angle and a 7 Ft front blade with power angle I do not use the loader frame for mounting it fastens directly to the front of the tractor and I use the loader joy stick with hoses to operate.
I also have the loreun cab made out of Canada, with heat, radio, camera 2 to the rear. 180# weights on the rear and 260 on the front.
The cab cost 6600.00 with shipping. I broke a side door and that was 1170.00 It has suicide doors and I was hauling it and it was not latched and the wind caught it.
I have some weights here if any one is interested. Ck25
Bare tractor with cab and 180 weight on the rear is 4400 Lbs
With the RM60 rear mower 4850 with no front weights you can add another 260 Lbs with the front weights.
so the total weight as I am mowing is 5110.
This tractor can not be legally towed in Penna with a 7000. pound trailer. I have to move in pieces. ndoes depend on the gross weight of the truck a little bit.
I had a CS2410 the weight on that was 2600 with mmm.
Now the CK2510 its weight is 2660 without the mmm and the mmm is about 414 more but I can barely legally haul that in Penna.
I tow with a Nissan Frontier, with a 5815 Gross and the trailer light weight with chains and tool box is about 1800 so I keep it pretty much centered on the rear axle. This is because I a am only allowed about 400 pound on the hitch and then the truck will be over weight. I had a 5000 pound license on the truck and I weighed it and it was 53?? so I could have been fined with a almost empty truck. Mostly tools. So now I am paying for a 7000 pound license and can only haul 5815 gross and that include passengers.
I would think you are more talking to brewmaster than me.
I have a loader for the CK25 Its like new and haven't used it in 6 years. I bought mine separate of the tractor since knowing the dealer he left me make mine up out of parts in a trailer that he purchased from Kioti. 2000.00 Like new it has a mismatched cylinder, and the part that was for the back hoe I cut off and painted with Allis Chalmers paint which was a perfect match. I also understand Kubota II paint is a match. I bought some and it was a little lighter. I had to make my own leveling rod.
Since I have a 8X8 with shuttle its a little unhandy for the loader. for snow I have a 7 ft back blade power angle and a 7 Ft front blade with power angle I do not use the loader frame for mounting it fastens directly to the front of the tractor and I use the loader joy stick with hoses to operate.
I also have the loreun cab made out of Canada, with heat, radio, camera 2 to the rear. 180# weights on the rear and 260 on the front.
The cab cost 6600.00 with shipping. I broke a side door and that was 1170.00 It has suicide doors and I was hauling it and it was not latched and the wind caught it.
I have some weights here if any one is interested. Ck25
Bare tractor with cab and 180 weight on the rear is 4400 Lbs
With the RM60 rear mower 4850 with no front weights you can add another 260 Lbs with the front weights.
so the total weight as I am mowing is 5110.
This tractor can not be legally towed in Penna with a 7000. pound trailer. I have to move in pieces. ndoes depend on the gross weight of the truck a little bit.
I had a CS2410 the weight on that was 2600 with mmm.
Now the CK2510 its weight is 2660 without the mmm and the mmm is about 414 more but I can barely legally haul that in Penna.
I tow with a Nissan Frontier, with a 5815 Gross and the trailer light weight with chains and tool box is about 1800 so I keep it pretty much centered on the rear axle. This is because I a am only allowed about 400 pound on the hitch and then the truck will be over weight. I had a 5000 pound license on the truck and I weighed it and it was 53?? so I could have been fined with a almost empty truck. Mostly tools. So now I am paying for a 7000 pound license and can only haul 5815 gross and that include passengers.
