New linkage for 1450 loader

[Justaplain]

That looks good. Your bucket bracket is different than mine. Did you modify that as well?? Mine is more of a triangle with not as much room to move around at the top. Now please give the distances you have those 3 holes apart and the thickness of the metal. Thanks bcs

 

[DK35vince]

At full height and full dump my bucket edge is close to 6" lower than the rear of the bucket. So I should be fine.

 

[DK35vince]

</font><font color="blue" class="small">( Your bucket bracket is different than mine. Did you modify that as well?? )</font>

No, I have the skid steer style quick attach that my pins go to instead of the bucket.

The linkage is 5/16" steel
The bucket pins are 3" higher
For the linkage, the lower 2 holes and linkage is the same with the very top (3rd pin ) 3" higher.
I needed to buy 2 pins Part#0550-3013
2 dust covers Part#0541-3002
2 O-rings Part#0520-3000
2 bolts Part#0545-2024
You will also need to add new curl and dump bucket stops