new member

/ new member #1  

jage

New member
Joined
Jan 24, 2013
Messages
2
Location
ft. mohave, az
Tractor
yanmar 3810d
Howdy. Just joined. Getting ready to r&r a yanmar 3810d that I bought a few years back. Looking forward to help from friendly forum folks and hope to be able to contribute as well. Thank you.

Jage
 
/ new member
  • Thread Starter
#3  
Thx. Bob. Can't remember exactly when we got the tractor. Just brought it back from Silver Springs, NV. yesterday. Dad had it on his little 5 acre place and has been running it pretty solid for several years. I'm going to start with a serious powerwash and go one leak at a time. First, worst problem is where the trans bolts to the housing that also bolts to the motor. Serious hydraulic leak on the left side like a bad gasket that almost shoots out under power in reverse. I'm going to need a manuel and probably a ton of help before its over. This forum was my first stop from Google, so I'm sure there's a ton more I can research before I bomb everybody with dumb questions. Take Care.

Jage
 
/ new member #6  
:welcome:
 

Marketplace Items

2016 Ram 5500 Chassis 4x4 ETI ETC37IH 37ft Bucket Truck (A61568)
2016 Ram 5500...
2022 Takeuchi TL12R2 (A60462)
2022 Takeuchi...
PLEASE READ (A63116)
PLEASE READ (A63116)
Rogator RG1100 (A63118)
Rogator RG1100...
2005 Isuzu NQR 4 door box truck with folding gate (A63118)
2005 Isuzu NQR 4...
ALUMINUM FUEL TANK & DEHA ELECTRIC BANDSAW (A62131)
ALUMINUM FUEL TANK...
 
Top