NH TC24DA Vertical Exhaust.

[77bronco]

All I need to do now is to add a heat shield around the bottom where it begins vertical up to the top of the loader arm where the automotive pipe starts. I was thinking of using something like this and tacking it the the "U" bolt part of the clamps to secure it. I suppose it would be mainly for looks though.

For a heat shield on the exhaust, you might try and find some header wrap at an auto parts store. Might be a little cheaper and easier to install.

 

[czechsonofagun]

You can have folding xhaust like Mississippi steamer:thumbsup:

Anyway, nice job. I broke my rusted exhaust on a branch and made it shorter and it works fine so far, but it will need to be replaced sooner or later. I will just use my experience with my jeep exhaust and parts from TSC.

 

[nickel plate]

That is the New Holland brush guard that is available. I have one on my TC-24D as well. I believe I paid about $190 for mine. At this point I believe it has save me probably $1500 from the amount of time it has stopped stuff from hitting the front of the tractor that otherwise would've busted the grill/headlights. It folds down so that you can open close the hood.

Thanks Jim, I'll have to find out if NH makes one for the TC-40.