I seem to have a lot of problems with pressure sensors on my 2004 New Holland TS135A tractor with about 2000 hours. I have had the red "STOP" light come on three times this summer and it costs us precious harvest time. Minor part cost but big time production cost. The sensors are hydraulic lube oil pressure sensor and two times on the "main hydraulic filter suction pressure". The last time I had pressure tested with guage and it never went below 40 psi while switch is tripped at pressures below 8-12 psi. No part available for 5 days so I am operating bypassed. Anyone else having similar type sensor problems?
NH TS135A Tractor Hydraulic Sensor Problems
- Thread starter balsip
- Start date
- Views: 8158
Robert_in_NY
Super Member
- Joined
- Aug 1, 2001
- Messages
- 8,586
- Location
- Silver Creek, NY
- Tractor
- Case-IH Farmall 45A, Kubota M8540 Narrow, New Holland TN 65, Bobcat 331, Ford 1920, 1952 John Deere M, Allis Chalmers B, Bombardier Traxter XT, Massey Harris 81RC and a John Deere 3300 combine, Cub Cadet GT1554
There are not very many owners of that tractor on here but hopefully RickB will see this thread and try to help you out. You should have put it in the New Holland forum though as it is New Holland specific. Hopefully one of the moderators will move it.
mark.r
Platinum Member
Ditto with what Robert said, that TS is quite a big unit. You can always post your question on AgTalk Home
Here are some similar links:
